Peter M. Groen / EasyOpenTherm

Commit 3280d7460819b87a94ac0ce6eb04143737f0fbcc

Authored by Jeroen88
1 parent c2215294

Update README.md: library can be installed directly from the library manager

Inline Side-by-side
Showing 1 changed file with 1 additions and 2 deletions
README.md
  View file @3280d74
@@ -8,8 +8,7 @@ The library can be easily installed in the Arduino IDE. It has been tested on an @@ -8,8 +8,7 @@ The library can be easily installed in the Arduino IDE. It has been tested on an
8 To connect the boiler, you will need an [OpenTherm controller](https://www.tindie.com/products/jeroen88/opentherm-controller/). 8 To connect the boiler, you will need an [OpenTherm controller](https://www.tindie.com/products/jeroen88/opentherm-controller/).
9 9
10 ## Installation 10 ## Installation
11 -- Download the library from [GitHub](https://github.com/Jeroen88/EasyOpenTherm/archive/refs/heads/main.zip)  
12 -- Install the library named EasyOpenTherm-main.zip using the Arduino IDE library manager 11 +- Install the EasyOpenTherm library directly using the Arduino IDE library manager
13 - Connect the pins marked 'OT' of the [OpenTherm controller](https://www.tindie.com/products/jeroen88/opentherm-controller/) with two wires to the boiler. You can use the existing wires from your current thermostat. The order of the wires is not important, they are interchangeable 12 - Connect the pins marked 'OT' of the [OpenTherm controller](https://www.tindie.com/products/jeroen88/opentherm-controller/) with two wires to the boiler. You can use the existing wires from your current thermostat. The order of the wires is not important, they are interchangeable
14 - Connect the pins marked '3v3' and 'GND' to the ESP32 pins '3v3; and 'GND' 13 - Connect the pins marked '3v3' and 'GND' to the ESP32 pins '3v3; and 'GND'
15 - Connect the pin marked 'RxD' to a pin supporting OUTPUT of the ESP32 and the pin marked 'TxD' to a pin supporting interrupts. The pins you use should be defined in the program (see below) 14 - Connect the pin marked 'RxD' to a pin supporting OUTPUT of the ESP32 and the pin marked 'TxD' to a pin supporting interrupts. The pins you use should be defined in the program (see below)