Peter M. Groen / DALI-Lighting-Interface

Commit d8f5eee72686b19c9d61f8d77b842581ac922e80

Authored by qqqlab
Committed by GitHub
1 parent ae5cef79

Delete Commissioning.ino

Inline Side-by-side
Showing 1 changed file with 0 additions and 201 deletions
Examples/Commissioning/Commissioning.ino deleted
View file @ae5cef7
1 -/*###########################################################################  
2 -DALI Interface Demo  
3 -  
4 -Commissioning demo - assign short addresses to all LED Drivers on the DALI bus  
5 -  
6 -Works with Arduino ATMEGA328 + Mikroe DALI Click  
7 -  
8 -----------------------------------------------------------------------------  
9 -Changelog:  
10 -2020-11-08 Created & tested on ATMega328 @ 8Mhz  
11 -----------------------------------------------------------------------------  
12 - Commisioning.ino - copyright qqqlab.com / github.com/qqqlab  
13 -  
14 - This program is free software: you can redistribute it and/or modify  
15 - it under the terms of the GNU General Public License as published by  
16 - the Free Software Foundation, either version 3 of the License, or  
17 - (at your option) any later version.  
18 -  
19 - This program is distributed in the hope that it will be useful,  
20 - but WITHOUT ANY WARRANTY; without even the implied warranty of  
21 - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the  
22 - GNU General Public License for more details.  
23 -  
24 - You should have received a copy of the GNU General Public License  
25 - along with this program. If not, see <http://www.gnu.org/licenses/>.  
26 -###########################################################################*/  
27 -  
28 -#define DALI_OUTPUT_PIN 3  
29 -#define DALI_INPUT_PIN 4  
30 -  
31 -#include "qqqDali_ATMega328.h"  
32 -  
33 -Dali_ATMega328 dali;  
34 -  
35 -void setup() {  
36 - Serial.begin(115200);  
37 - Serial.println("DALI Commisioning Demo");  
38 -  
39 - //start the DALI interfaces  
40 - //arguments: tx_pin, rx_pin (negative values disable transmitter / receiver)  
41 - //Note: the receiver pins should be on different PCINT groups, e.g one  
42 - //receiver on pin0-7 (PCINT2) one on pin8-13 (PCINT0) and one on pin14-19 (PCINT1)  
43 - dali.begin(DALI_OUTPUT_PIN, DALI_INPUT_PIN);  
44 -  
45 - menu();  
46 -}  
47 -  
48 -  
49 -void loop() {  
50 - while (Serial.available() > 0) {  
51 - int incomingByte = Serial.read();  
52 - switch(incomingByte) {  
53 - case '1': menu_blink(); menu(); break;  
54 - case '2': menu_scan_short_addr(); menu(); break;  
55 - case '3': menu_commission(); menu(); break;  
56 - case '4': menu_commission_debug(); menu(); break;  
57 - case '5': menu_delete_short_addr(); menu(); break;  
58 - }  
59 - }  
60 -}  
61 -  
62 -void menu() {  
63 - Serial.println("----------------------------");  
64 - Serial.println("1 Blink all lamps");  
65 - Serial.println("2 Scan short addresses");  
66 - Serial.println("3 Commission short addresses");  
67 - Serial.println("4 Commission short addresses (VERBOSE)");  
68 - Serial.println("5 Delete short addresses");  
69 - Serial.println("----------------------------");  
70 -}  
71 -  
72 -  
73 -void menu_blink() {  
74 - Serial.println("Running: Blinking all lamps");  
75 - for(uint8_t i=0;i<5;i++) {  
76 - dali.set_level(254);  
77 - Serial.print(".");  
78 - delay(500);  
79 - dali.set_level(0);  
80 - Serial.print(".");  
81 - delay(500);  
82 - }  
83 - Serial.println();  
84 -}  
85 -  
86 -void menu_scan_short_addr() {  
87 - Serial.println("Running: Scan all short addresses");  
88 - uint8_t sa;  
89 - uint8_t cnt = 0;  
90 - for(sa = 0; sa<64; sa++) {  
91 - int16_t rv = dali.cmd(DALI_QUERY_STATUS,sa);  
92 - if(rv!=DALI_RESULT_NO_REPLY) {  
93 - cnt++;  
94 - Serial.print("short address=");  
95 - Serial.print(sa);  
96 - Serial.print(" status=0x");  
97 - Serial.print(rv,HEX);  
98 - Serial.print(" minLevel=");  
99 - Serial.print(dali.cmd(DALI_QUERY_MIN_LEVEL,sa));  
100 - Serial.print(" flashing");  
101 - for(uint8_t i=0;i<5;i++) {  
102 - dali.set_level(254,sa);  
103 - Serial.print(".");  
104 - delay(500);  
105 - dali.set_level(0,sa);  
106 - Serial.print(".");  
107 - delay(500);  
108 - }  
109 - Serial.println();  
110 - }  
111 -// }else{  
112 -// //remove all short addres for this sa  
113 -// dali.cmd(DALI_DATA_TRANSFER_REGISTER0,0xFF);  
114 -// dali.cmd(DALI_SET_SHORT_ADDRESS, sa);  
115 -// }  
116 - }  
117 - Serial.print("DONE, found ");Serial.print(cnt);Serial.println(" short addresses");  
118 -}  
119 -  
120 -//might need a couple of calls to find everything...  
121 -void menu_commission(){  
122 - Serial.println("Running: Commission");  
123 - Serial.println("Might need a couple of runs to find all lamps ...");  
124 - Serial.println("Be patient, this takes a while ...");  
125 - uint8_t cnt = dali.commission(0xff); //init_arg=0b11111111 : all without short address  
126 - Serial.print("DONE, assigned ");Serial.print(cnt);Serial.println(" new short addresses");  
127 -}  
128 -  
129 -//might need a couple of calls to find everything...  
130 -void menu_commission_debug(){  
131 - Serial.println("Running: Commission (VERBOSE)");  
132 - Serial.println("Might need a couple of runs to find all lamps ...");  
133 - Serial.println("Be patient, this takes a while ...");  
134 - uint8_t cnt = debug_commission(0xff); //init_arg=0b11111111 : all without short address  
135 - Serial.print("DONE, assigned ");Serial.print(cnt);Serial.println(" new short addresses");  
136 -}  
137 -  
138 -void menu_delete_short_addr() {  
139 - Serial.println("Running: Delete all short addresses");  
140 - //remove all short addresses  
141 - dali.cmd(DALI_DATA_TRANSFER_REGISTER0,0xFF);  
142 - dali.cmd(DALI_SET_SHORT_ADDRESS, 0xFF);  
143 - Serial.println("DONE delete");  
144 -}  
145 -  
146 -//init_arg=11111111 : all without short address  
147 -//init_arg=00000000 : all  
148 -//init_arg=0AAAAAA1 : only for this shortadr  
149 -//returns number of new short addresses assigned  
150 -uint8_t debug_commission(uint8_t init_arg) {  
151 - uint8_t cnt = 0;  
152 - uint8_t arr[64];  
153 - uint8_t sa;  
154 - for(sa=0; sa<64; sa++) arr[sa]=0;  
155 -  
156 - dali.cmd(DALI_RESET,0x00);  
157 - dali.cmd(DALI_INITIALISE,init_arg);  
158 - dali.cmd(DALI_RANDOMISE,0x00);  
159 -  
160 - //find used short addresses (run always, seems to work better than without...)  
161 - Serial.println("Find existing short adr");  
162 - for(sa = 0; sa<64; sa++) {  
163 - int16_t rv = dali.cmd(DALI_QUERY_STATUS,sa);  
164 - if(rv!=DALI_RESULT_NO_REPLY) {  
165 - if(init_arg!=0b00000000) arr[sa]=1; //remove address from list if not in "all" mode  
166 - Serial.print("sortadr=");  
167 - Serial.print(sa);  
168 - Serial.print(" status=0x");  
169 - Serial.print(rv,HEX);  
170 - Serial.print(" minLevel=");  
171 - Serial.println(dali.cmd(DALI_QUERY_MIN_LEVEL,sa));  
172 - }  
173 - }  
174 -  
175 - Serial.println("Find random adr");  
176 - while(1) {  
177 - uint32_t adr = dali.find_addr();  
178 - if(adr>0xffffff) break;  
179 - Serial.print("found=");  
180 - Serial.println(adr,HEX);  
181 -  
182 - //find available address  
183 - for(sa=0; sa<64; sa++) {  
184 - if(arr[sa]==0) break;  
185 - }  
186 - if(sa>=64) break;  
187 - arr[sa] = 1;  
188 - cnt++;  
189 -  
190 - Serial.print("program short adr=");  
191 - Serial.println(sa);  
192 - dali.program_short_address(sa);  
193 - Serial.print("read short adr=");  
194 - Serial.println(dali.query_short_address());  
195 -  
196 - dali.cmd(DALI_WITHDRAW,0x00);  
197 - }  
198 -  
199 - dali.cmd(DALI_TERMINATE,0x00);  
200 - return cnt;  
201 -}