Remove imager beta release

This is a very old test image and shouldn't be in this repo. Since it's bit rotted remove it to avoid confusion. The image should probably be published via a different repo.

Remove imager beta release
This is a very old test image and shouldn't be in this repo. Since it's bit rotted remove it to avoid confusion. The image should probably be published via a different repo.
tim · Phil Elwell
1 parent 1aca6bca
Showing 6 changed files with 0 additions and 36 deletions
Readme.md
imager/.gitignore
imager/README.md
imager/boot.img
imager/bootcode4.bin
imager/config.txt
@@ -165,18 +165,3 @@ openssl rsa -in private.pem -pubout -out public.pem`
  
 #### Copy the secure boot image to the boot partition on the Raspberry Pi.
 Copy `boot.img` and `boot.sig` to the chosen boot filesystem. Secure boot images can be loaded from any of the normal boot devices (e.g. SD, USB, Network).
-
-### Raspberry Pi Imager - BETA
-The Raspberry Pi Imager can be run natively on the CM4 providing a GUI for downloading and installing the operating system.
-
-Beta notes:
-* The current version runs rpi-update upon completion in order to update the firwamre and kernel.
-* uart_2ndstage is enabled 
-* The HDMI display is limited to 1080p to avoid potential problems with cables etc if a 4K display is attached.
-
-Run Raspberry Pi Imager:  
-```bash
-sudo ./rpiboot -d imager
-```
-
-Once the imager is running you will be prompted to remove the micro-usb cable and connect a mouse.
-*.h
-# Signing the Raspberry Pi Imager for secure boot
-
-If secure-boot has been enabled then this image must be signed with
-the customer's RSA private key. Otherwise, the SPI EEPROM bootloader
-will refused to load this image.
-
-To do this run:
-
-```bash
-KEY_FILE=$HOME/private.pem
-../tools/rpi-eeprom-digest -i boot.img -o boot.sig -k "${KEY_FILE}"
-```
-
-To run load the USB MSD device drivers via RPIBOOT run
-```bash
-../rpiboot -d .
-```
-boot_ramdisk=1
-uart_2ndstage=1
-