boot.conf 386 Bytes

Edit Raw Blame History

[all]
BOOT_UART=1
WAKE_ON_GPIO=0
POWER_OFF_ON_HALT=1
HDMI_DELAY=0

# SD, USB-MSD, BCM-USB-MSD, Network
BOOT_ORDER=0xf2541

# Disable self-update mode
ENABLE_SELF_UPDATE=0

# Select signed-boot mode in the EEPROM. This can be used to during development
# to test the signed boot image. Once secure boot is enabled via OTP this setting
# has no effect i.e. it is always 1.
SIGNED_BOOT=1